Digital Ultrasonic Wall Thickness Gauge

With the practical and easy-to-operate Putzmeister - Digital Ultrasonic Wall-Thickness Gauge, you can determine practically, reliably and quickly on the value of your wear parts. For steel and other home genous materials (aluminium, cast iron, etc.) precise measuring accuracy is the result. The integrated zero-adjustment disc is mounted on the front panel to enable the user to check that the gauge is functioning correctly. All the materials that are subject to wear such as, for example, trunk, S-pipe, spectacle plate, delivery lines etc. can thereby controlled and exchanged on time for safety reasons before any damage occurs on the site.

For steel the digital measured values can be read directly on the display. For other materials such as copper, aluminium, plastic, etc. you must determine the wall thickness with the aid of the multiplier which is printed on the enclosed operating instructions.

The most important technical specifications:

• Measuring range min. 1,0 up to max. 155 mm
• Accuracy ± 0.1 mm
• Display for weak battery
• Calibrator disc for automatic zero correction
• Storage display from the last measurement
• Automatic switching off (after 2 min. break)
• Protected against water
• Exchangeable 9 V Alkaline - battery
• Dimensions: 145 x 80 x 35 mm - weight 300 gr.

Standard-Equipment:

Wall thickness gauge with integrated calibrator disc for zero-adjustment, testhead with 120 cm long connection cable, 1 battery, ultrasonic liquid, plastic case

Accessories:

Ultrasonic liquid - 250 gr.